00050064.DOC, Version 1.1
26/27
DMX-controlled operation
You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
The OFL-72 W/A IP65 has 2 DMX-modes.
5 channels mode
Control-channel 1
Control-channel 2
Control-channel 3
Control-channel 4
Control-channel 5
white LEDs
amber LEDs
Color temperature
Strobe
Dimmer
Control-channel 3 - Color temperature
Decimal Hexad. Percentage S/F
Feature
0
0 00 00
0% 0%
S No function (shutter open)
1 64 01 40
0% 25%
S Color temperature (3200 K)
65 128 41 80
25% 50%
S Color temperature (4300 K)
129 192 81 C0
51% 75%
S Color temperature (5600 K)
193 255 C1 FF
76% 100%
S Color temperature (6500 K)
Control-channel 4- Strobe
Decimal Hexad. Percentage S/F
Feature
0 0
00 00
0% 0%
S Open
1 95
01 5F
0% 37%
F Strobe-effect with increasing speed
96 127
60 7F
38% 50%
S Open
128 159
80 9F
50% 62%
F Pulse-effect in sequences
160 191
A0 BF
63% 75%
S Open
192 223 C0 DF
75% 87%
F Random strobe-effect with increasing speed
224 255
E0 FF
88% 100%
S Open
2 channels mode
Control-channel 1
Control-channel 2
white LEDs
amber LEDs
Addressing
Depending on the DMX-mode, each device of the OFL-72 W/A IP65 occupies 2 or 5 DMX-channels. The
Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the OFL-72 W/A IP65 will respond to the controller.
Please, be sure that you don’t have any overlapping channels in order to control each OFL-72 W/A IP65
correctly and independently from any other fixture on the DMX-chain.
If several OFL-72 W/A IP65 are addressed similarly, they will work synchronically.
Note:
It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last device in the link in order to
ensure proper transmission on the DMX data link.
