15
•
EN
Changing the operating mode (model WDS-G5 TX)
Model WDS-G5 TX can operate either as transmitter or as receiver. To change the operating mode hold the
FUNCTION
button and connect the device to mains power.
The device switches the operating mode.
Disconnecting receivers from the transmitter
Press
FUNCTION
on the
receivers
for about three seconds.
The LED goes off on and the receivers are unlinked.
Disconnecting all receivers from the transmitter
Press
FUNCTION
on the
transmitter
for about five seconds until the LED starts flashing.
All registered receivers linked to that transmitter will be unlinked. The LED goes off on the receivers.
TECHNICAL SPECIFICATIONS
WDR-G5 RX/WDS-G5 TX
Power supply:
230 V AC, 50 Hz
Power consumption:
3 W
IP classification:
IP65
DMX channels:
512 (1 universe)
Carrier frequency:
2.4 GHz ISM band
Modulation:
AFHSS
Coverage:
up to 500 m (line-of-sight)
Antenna:
5 dBi
DMX connector:
3-pin XLR (pin 1: ground, pin 2: signal -, pin 3: )
Dimensions with antenna (L x W x H): 135 x 100 x 90 mm
Weight:
0.9 kg
Specifications are subject to change without notice due to product improvements.
PROTECTING THE ENVIRONMENT
Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal
which is not harmful to the environment. Devices marked with this symbol must not be disposed of as
household waste. Contact your retailer or local authorities for more information. Remove any inserted
batteries and dispose of them separately from the product.
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable
batteries. Disposing of them in the household waste is prohibited. You may return your used batteries
free of charge to collection points in your municipality and anywhere where batteries/rechargeable
batteries are sold. By disposing of used devices and batteries correctly, you contribute to the
protection of the environment.
