Future light 51834022, User Manual

Page: 15 / 20

15
•
EN
OPERATING ELEMENTS AND CONNECTIONS
Front panel
No. Element Function
1 Antenna port For connecting the antenna provided
2 POWER LED Power indication
3 DMX LED In TX mode (transmitter):
• Lights permanently: Transmission path active, DMX signals are being
sent
• Flashes every 1.5 sec: Transmission path not active
• Flashes every 1.0 sec: Transmission path active, no DMX signal present
• Flashes every 0.2 sec: The device tries to set up a transmission path to a
receiver
• Off: Operating mode or used frequency range can be switched.
In RX mode (receiver):
• Lights permanently: Transmission path active, DMX signals are being
received
• Flashes every 1.0 sec: Transmission path active, no DMX signal present
• Flashes every 0.2 sec: The device tries to set up a transmission path to a
transmitter
• Off: Transmission path not active
4 MODE LED Indicates the frequency band used (model WDS-G4 TX)
• Off: frequency range 1
• Flashes: frequency range 2
• Lights permanently: frequency range 3
5 FUNCTION button For pairing devices and on model WDS-G4 TX for changing the frequency
range and switching between transmitter/receiver mode
6 Power button Switches the device on and off
Rear panel
No. Element Function
7 AC230V jack Lockable P-Con input for mains connection
8 Fuse holder Only use fuses of the same rating and power. The correct fuse value is
specified on the device. Only replace the fuse when the unit is
disconnected from the mains.
9 DMX IN jack DMX input, 3-pin XLR
10 DMX OUT plug DMX output, 3-pin XLR