Ringer Switch ON / OFF and Ringer LED Lights
Your phone provides an on
– off switch, when you don‘t want to be disturbed, slide
the switch to the off position. Now you can still make outgoing calls without being
disturbed by incoming calls. The ringer LED lights will still flash even if the on-off
switch is in the off position
Handset
Receiver Volume Switch VHI / HI / MED
This switch may be used to adjust the handset volume of receiver.
VHI=Very High HI = High and MED=Medium
NORMAL
– ONE TOUCH SWITCH
This switch is used to switch between Normal and One touch dialing
FLASH KEY
This key is for getting a new line if you make a mistake when dialing or it is also
used to answer a call waiting call…
MEMORY KEY
This key is used when storing numbers into the memory and dialing out from the
memory.
M1, M2 and 911 KEYS
These keys are used for a one touch memory without lifting the handset at all
Just push the key M1 or M2 and the memory number will be dialed out and the
speakerphone will be on automatically
NOTE:
911 will be preprogramed in the factory.
To Dial a Normal number
You can pick up the handset or push the speakerphone key then dial the number
you want using the (0-9) key or you can enter the number you want using the (0-9)
Keys it will show on the LCD display then pick up the handset or push the
speakerphone key your call will be
automatically dialed…
To Dial Memory Numbers
Your phone provides the
option of “Normal” or “One Touch” dialing mode.
Normal mode
- To retrieve numbers stored in the key button (0-9)
Pick up the handset or push speakerphone key and press and release the
MEMORY button. Then press the key button number (0-9) which stores the
telephone number you want to dial. Your call will be automatically dialed.
One Touch mode
- To retrieve numbers stored in the key button (0-9)
Pick up the handset or push speakerphone key then press one of the key buttons
(0-9) which stores the telephone number you want to dial.
Your call will be automatically dialed.
