In
st
all
at
io
n
:
IR
C
on
tro
l
AL965 Actuator Lift
IR Controls
General Wiring
IMPORTANT
If the mechanism is left without
power for more than 14 days, all
memory positions will be lost. If
this is the case, the mechanism
will need to be reset, see page 6
for further information.
Future Automation IR Remote
Controller needs x2 AAA batteries
which are provided within the
packaging
Replacing batteries
Out
- Raises
the screen to
stored position
In
- Lowers
the screen to
stored position
Stop
- Will stop
the operation at
any point
In manual
override
Out manual
override
Store
- Stores the
current location into
the AL965 memory
Page 14 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
Storing Positions
Use the manual buttons on the
controller to raise and lower the
screen to the desired positions.
Once the screen is in the
lowered position press STORE
then press IN to store the current
location. Use the manual buttons
to raise the screen to the desired
height, press STORE then press
OUT to store the OUT
position.
The IN and OUT buttons will then
raise and lower the screen to the
stored locations automatically.
Safety Note
When the mechanism is moving, if any button
is pressed apart from those already assigned,
the mechanism will stop immediately.
Power Supply
Control Box
IR Sensor
Motors
AC Mains Power
