2
Automatic Leveling
When the pendulum is unlocked (figure 3), the pendulum is free to automatically
level, In order for the Cross Line Laser to automatically level, the base of the unit
needs to be within 4
°
of level.
When the pendulum is unlocked and the Cross Line Laser is within 4
°
of level, the
unit will be in automatic leveling range, in this situation only the BATTERY LED
light will be on.
Should the base of the unit be outside the 4
°
leveling range the laser beam will
start with a quick flash.
Low Battery Alarm:
The Red battery LED will be on when the laser is turned on. It will keep flashing
slowly when the working voltage of laser is below 4.4V. At this situation the
batteries are required to be replaced. Laser will shut off itself when the voltage is
below 3.9V.
Figure 3
