23
To Measure Another Site or Repeat a Measurement
Place the Light Wand firmly on the particular body site and follow steps outlined in 6 and 7.
OFF Message
An OFF Message will appear
and the FUTREX-5000A/WL Automatic
Power Down feature will turn the unit
OFF if the user has not pressed any key
for 6 minutes. To use the unit again,
turn the Power Switch OFF and then ON again.
1)
Purpose of the Arm Band:
!
Locates the measurement site on the biceps.
!
Blocks out all external light that might interfere with the estimations when self testing percent body fat.
2)
Using a Biceps Locator or the scale provided on the Arm Band, measure the length between the armpit and the inside of
the elbow. Extend the Arm Band so the Scale is facing up.
NOTE:
This relative body fat is not a direct "Percentage" reading. This value, however, can be used
as a guide to monitor changes in fat distribution within the location measured.
SELF MEASUREMENT OF PERCENT BODY FAT
Summary of Contents for 5000/XL
Page 3: ...2 1 Main Body 2 Optical Standard...
Page 4: ...3 3 Light Wand...
Page 41: ...Printed in U S A...
