OK
Sensor Solution Source
Load · Torque · Pressure · Multi-Axis · Calibration · Instruments · Software
www.futek.com
Mechanical Installation
The following items should be observed
to avoid damage to the LCF sensor during
installation and usage .
•
Avoid conditions that exceed the sensors
IP rating .
•
Store in a dry area without fixtures .
MAXIMUM MOMENTS AND OFF-AXIS
LOADING
•
Extraneous load information can be used
to assist in determining if the sensor
can withstand any unavoidable off-axis
loads and moments . Extraneous load
information can be found at:
futek .com/extraneous-load-factor
•
An extraneous how-to guide can be
found at:
pdf/Extraneous_Load_Factors/How_To_
Calculate_Extraneous_Loads .pdf
1.
Do not pull on or carry sensor
by cable .
2.
Monitor sensor output for
effects on zero output during
installation to avoid damage .
3. I
nstall in a dry, clean
environment, unless IP rating
allows for other environments
LCF Tension and Compression Sensor Family Manual
4
