11
Press Settings to enter in values.
Choose the correct serial number
from the drop down list.
Enter in the positive V of your load
cell. No sign is needed.
(Enter same as negative V if not
available).
Enter in the negative V of your load
cell. No Sign is needed.
(Enter same as positive V if not
available).
Enter in the positive direction
engineering amount for full capacity.
No sign is needed.
Enter in the negative direction
engineering amount for full capacity.
No sign is needed.
Select the desired engineering unit
from the drop down menu.
Set the entered parameters.
Save the entered parameters.
Enable the Scale Method for the
selected serial number.
Scale Method can be used to scale a V calibrated USB device into an engineering unit.
ℹ
1
8
5
2
9
3
10
6
4
7
TIPS ON SCALE METHOD
A SENSIT calibration and setup video
can be found online at:
http://www.
futek.com/sensit/videos.aspx
An online calibration database
containing a summary of the sensor’s
calibration can be found at:
http://
www.futek.com/calibrationData.aspx
There can be only one profile set for
each serial number.
The Scale method information is stored
locally onto the computer. A new Scale
method will need to be done when
USB is used on another computer.