Futech 009.02.S, Instructions Manual

Page: 24 / 40

Horizontal and vertical leveling
Push the ON/OFF button to turn on the device. Both laserlines,
horizontal and vertical, are visible.
Make sure that the instrument is not on too much of a slope (within
4,5°). If the slope of the instrument should exceed 4,5°, the lasers
will flash automatically.
Turn off the device
To turn off the device, push the on/off button.
GENERAL
Description
The following directions should enable the person responsible for
the device, and the person who actually uses the equipment, to
anticipate and avoid operational hazards. The person responsible
for the device must ensure that all users understand these direc-
tions and adhere to them.
Adverse Use
Use of the device without instruction.
Use outside of the intended limits.
Disabling safety features.
Removal of hazard notices.
Opening the device using tools, for example screw- driver, unless
this is specifically permitted for certain functions.
Modification or conversion of the device.
Use after misappropriation.
Use of devices with obviously recognizable damages or defects.
Use with accessories from other manufacturers without the prior
explicit approval of FUTECH.
Inadequate safeguards at the work site, for example when using
on or near roads.
Deliberate dazzling of third parties.
Controlling of machines, moving objects or similar monitoring
application without additional control and safety installations.
WARNING
Adverse use can lead to injury, malfunction and damage. It is the
task of the person responsible for the equipment to inform the