FUTAIHUA CMC187 User Manual Download Page 10

 

 

 

Appendix 

  UHF Card issuer common troubleshooting                           

1.  Unable to open the UHF issuing organ for card function: 

A.  Please check whether the equipment and computer lines to connect USB and serial port; If not connected

 please 

connect the USB cable and the serial port. 

B.  Please check equipment port number is consistent with the computer’s port number; If not consistent, please set 

the device port. 

C.  Please check whether the equipment install the USB driver; If not, please install the USB driver. 

 

2.  Unable to search to tag: 

A.  May be output value of the equipment is too low, please send equipment power output value is set to “23dBm”. 
B.  May be a UHF tags have been damaged

please replace the UHF tags. 

Appendix

 After-sales service commitment:

 

 

Product warranty period is one year, without damage to natural disaster and man-made factors, during the warranty 

period free warranty; 

 

Product once sold, except for product quality problem need to repair or replace, shall not return; 

 

Due to artificial damage, guarantees the failure due to improper operation, the implementation of maintenance fee

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for CMC187












Reviews: