12
3. Joining left and right main wings
1
1
1
4
źƌƑƊŃŭƒƌƑƗقźƒƒƇك
źƌƑƊŃŸƓŐƖƌƇƈ
قŸƓŐƖƌƇƈŃك
قŸƓŐƖƌƇƈك
● Insert a wing joint which is painted thinly on both
sides with epoxy adhesive on one side of Wing.
Notice up and down side.
● Temporarily fix with tape to completely cure the
epoxy adhesive. Peel off the temporary fixing tape
after curing.
1
3
● Insert
Wing
. Wipe off the protruding adhesive.
ŧƌƋƈƇƕƄƏŃƄƑƊƏƈŃƌƖŃƄƗƗƄƆƋƈƇŃƗƒŃƗƋƈŃƐƄƌƑŃƚƌƑƊő
ŷƈƐƓƒƕƄƕƜŃƲƛƌƑƊŃƗƄƓƈ
8
1
6
Do not cut balsa of the wing.
7
1
5
● D r a w a t e a r l i n e
along the wing plate
with a marker.
● Match the hole
positions.
Epoxy Adhesives
.
Mix the base and
curing agent well,
and thinly.
1
2
● Apply thin epoxy adhesive to the surface of the figure.
Epoxy Adhesives
.
Mix the base and
curing agent well,
and thinly.
źƌƑƊŃŸƓŐƖƌƇƈ
ŬƕƒƑ
ůƒƚŃƗƈƐƓƈƕƄƗƘƕƈŃ
ƖƈƗƗƌƑƊ
T h e f i l m p e e l s o f f t h e
transparent sheet and its
side is the adhesive side.
źƌƑƊŃŦƈƑƗƈƕŃŦƒƙƈƕŃũƌƏƐ
Also paste the
back side
.
● Cut the film of Wing Plate attachment part
and peel off.
● Adhere the
Wing Plate
with
CA glue
.
● Attach the
Wing Plate
to the main wing.
źƌƑƊŃųƏƄƗƈ
● Cover the central junction of the wing with the
Wing Center Cover Film
.
