108
<Model Menu (Helicopter Functions)>
MODEL MENU (HELICOPTER)
This section contains information on the
commands that apply to helicopters only. For
instructions on Airplanes and Sailplanes, refer
to the sections pertaining to those aircraft. Each
of these functions can be set independently for
GLIIHUHQWÀLJKWFRQGLWLRQV7RJHWWRWKHVHVHWWLQJV
touch the desired function button to be entered.
Use the Model Type function in the Linkage
Menu to select the swash type matched to the
helicopter beforehand. If you later change model
types, all settings will be lost.
Also, add flight conditions at the Condition
Select screen before setting the model data at each
function. (Up to 8 conditions can be used)
The AFR function, fuel mixture and other
functions common to all model types, are described
in a separate section.
ŏ5RPHVFUHHQ
ŏ7RXFKWKH0RGHO0HQXEXWWRPHVFUHHQWR
FDOOWKHPHQXVKRZQEHORZ7RXFKWKHEXWWRQRIWKH
IXQFWLRQ\RXZDQWWRVHWWRFDOOWKHVHWXSVFUHHQ
Model Menu functions (helicopter) list
Condition Hold function
ŏ <RXFDQWXUQRQDQGRIIWKH&RROGIXQFWLRQE\WKHEXWWRQRQWKH
ORZHUOHIWRIWKHVFUHHQRQO\ZKHQWKH7KURWWOH6WLFNLVRQWKHVORZVLGH
PIT Curve:
$GMXVWVUHVSRQVHLQGLIIHUHQWÀLJKWFRQGLWLRQV
THR Curve:
Throttle curve and hovering trim adjustment
Acceleration:
Counteracts torque due to sudden throttle and pitch commands
Throttle Hold:
Moves the throttle to idle during autorotation
Swash Mix:
Compensates for each control response
Throttle Mix:
Compensates for power loss when cyclic applied
Pit to Needle:
$GMXVWVUHVSRQVHFXUYHLQGLIIHUHQWÀLJKWFRQGLWLRQV
Pit to RUD:
Handles torque changes from pitch angle inputs
Fuel Mixture:
Commands a second servo to adjust the fuel mixture at the carburetor
Gyro:
Used to switch gyro sensitivity
Governor:
Used to switch RPM of the helicopter’s head
