RATEINGS
Power supply voltage
Current drain
Dimensions and weight
4.8V shared with receiver (6V for external supply)
Motor: 100mA, Amplifier: 20mA (at 4.8V)
Gyro body: 1.57 x 1.65 x 1.60 in. (42 x 34 x 39mm)
Control amplifier: 1.73 x 2.28 x .63 in.(44 x 58 x 16mm) - 1.61 oz.(45g)
Control box: .94 x 1.34 x .59 in. (24 x 34 x 15mm) -
- 2.86 oz (69g)
.54oz.(15g)
CONNECTIONS
The G153/G153BB and G133/G133BB are in-
terchangeable by changing the connectors and
readjusting the neutral trimmer.
Connect to the servo (rudder servo for helicopter)
Special 6V five cell Nicad battery
pack connector for motor reg-
ulated power supply. (Insert the
jumper connector when a shared
power supply is used.)
Connect to receiver channel
to be stabilized
(rudder channel for helicopter)
Control amplifier
(C) Connector
(A) Connector
Black
(A) Connector
G133/G133BB
(B) Connector
Gyro direction
reverse switch
(B) Connector
G133/G133BB
White
Connected servo (rudder servo for helicopter)
neutral trimmer (this trimmer is operative even
when the control box power switch is off).
Connection connector
(Can be connected/disconnect-
ed in the arrow direction.)
Connect to receiver
retract or auxiliary channel
(for gyro sensitivity switching)
Gyro
body
Gyro power switch
Gyro output trimmer
Jumper connector
(C) Connector
G133/G133BB
(D) Connector
(D) Connector
G133/G133BB
Black
