Step 5) Set program mix 2
Here are the details for step 5)
l)
When in step 4 above, press the mode button to enter Program Mix 2 Setup (Screen shown above)
m)
Move the ELEVATOR Stick back and use the KNOB to set -100%
n)
Move the ELEVATOR Stick forward and use the KNOB to set +100%
o)
Press END twice to exit.
Moving the stick any direction, moves the Remote on/off channel down.
On this transmitter, the ELE. D/R switch will turn the program mixes on or off. Leave
that switch down to keep the mixes on.
You can test the stick remote by moving your hand around the sensor. The response of
the sensor should go to zero at full stick movement of the aileron or elevator.
The AutoTrim feature should be left on with Stick Priority. But, if it needs to be turned
off, follow the instructions in the CoPilot or FS8 manual.
Any questions can be emailed to
