h)
When in step 2 above, press the mode button to enter Program Mix 1 Setup (Screen shown above)
i)
Move the Aileron Stick to the LEFT and use the KNOB to set +100%
j)
Move the Aileron Stick to the RIGHT and use the KNOB to set –100%
k)
Press END twice to exit.
Step 4) Set Program Mix2 with the following. The ELEVATOR (ch2) mixes into the
GEAR (ch5) channel.
Here are the details for step 4)
j)
Press MODE and hold to enter setup
k)
Press MODE to select program mixes
l)
Rotate the KNOB to choose PROG MIX2
m)
Press the KNOB to select PROG.MIX2
n)
Press MODE to bring up the screen above
o)
Use the KNOB to turn MIX>ON
p)
Go to the next line with the DOWN button
q)
Use the KNOB to set MAS>ELEV
r)
Go to the next line with the DOWN button
s)
Use the KNOB to set SLV>FLAP. If the gear knob is to be used, select GEAR here.
