48
SM2209
INSTALLING THE MACHINE
(ACCORDING TO MODEL)
For transport purposes the swinging unit in the machine is blocked using 4
spacers with screws. Before starting the machine these spacers and lock
screws must be removed, and stored for use in the event of a possible change
of location.
Block off the holes with the plugs provided, which can be found in the bag
containing the documents.
For transport purposes the swinging unit in the machine is blocked using 4 spac-
ers with screws. Before starting the machine these screws must be removed
using a screwdriver.
Insert a screwdriver in the holes and proceed as shown in the fi gure to recover
the 4 plastic spacers.
The machine must be installed by professionally qualifi ed technicians, according
to the manufacturer’s indications. Incorrect installation may result in damage to
persons and property.
The machine can be installed anywhere, provided the temperature in the place of
installation is not below 3°C and the cables and hoses at the rear of the machine
are not crushed in any way.
GB
2
3
5
4
