FUST NOVAMATIC NM 2830 Instruction Manual Download Page 49 | Manualshive

Page: 49 / 49

background image

The LCD screen is
not clear

- The screen sharpness needs to be adjusted.

10

Stitches are skipped

- The needle is not inserted correctly, bent or blunt.
- The machine has not been threaded correctly.
- The needle or thread size does not match the fabric used.
- Use a stretch needle to sew stretch fabrics.
- The pression of the presser foot is not high enough for the fabric

used.

14
19
16
16
13

The needle breakes

- The needle is not inserted correctly, bent or blunt.
- The needle clamp screw is loose.
- The top thread tension is too high.
- The needle is too thin for the fabric used.

14
14
25
16

NM 2830 e - 49 -

The thread breakes

- The machine has not been threaded correctly.
- The top thread tension is too high.
- The needle is not inserted correctly, bent or blunt.
- The threads were not held at the beginning of the seam.
- The thread size does not match the needle size.
- Clean the hook race.
- The bobbin is broken and has to be replaced.

19
25
14
22
16
48

The seam puckers

- The top thread tension is too high.
- The machine has not been threaded correctly.
- The needle is too large for the fabric used.
- The stitches are too big for the fabric used.
- The pression of the presser foot does not match the fabric

used.

25
19
16

13

The fabric is not fed
regularly

- There is lint or dust between the teeth of the feed dogs.
- The pression of the presser foot is not high enough for the fabric

used.

- The stitches are too big.
- The feed dogs have been lowered and not raised again.

48
13

13

The machine does
not work

- The plug has not been inserted into the socket.
- The thread has become entangled in the hook race.
- The bobbin winder is in the position to wind the bobbin.

8

48
17

The stitch patterns
are irregular

- The stitch pattern has to be adjusted to the fabric.

26

Problem

Possible causes

Page

TROUBLE-SHOOTING

The buttonhole
stitches are irregular

- The density of the rows of the buttonhole does not match the

fabric used.

- An interfacing is needed for stretch fabrics.
- The fabric was pulled.

Never pull the fabric, but let the feed dogs guide the fabric.

32

30
22

The message "STOP
FOR SAFETY
PURPOSES"scrolls
over the screen

- The sewing machine is overloaded. Stop sewing until the message

disappears again.

- The hook race is not clean
- The fabric used is too heavy.

47

48

NM2830e 29/3/07 12:05 PM Page 49

«
...
47
48
49

Summary of Contents for NOVAMATIC NM 2830


















































Reviews:

No comments

Related manuals for NOVAMATIC NM 2830

Brand: Janome Pages: 43

Brand: Clarke Pages: 61

Brand: Weslo Pages: 12

Brand: Radio Shack Pages: 32

Brand: R+M Suttner Pages: 2

Brand: HIGHLEAD Pages: 35

Brand: Kärcher Pages: 55

Brand: UnionSpecial Pages: 86

Brand: Baby Lock Pages: 2

Brand: MyBinding Pages: 3

Brand: Consew Pages: 26

Brand: FONESTAR Pages: 16

BlastRazor Z-25RC

Brand: Contracor Pages: 40

Brand: Singer Pages: 67

Brand: JUKI Pages: 24

Brand: ISM Pages: 33

Brand: Bosch Pages: 17

Brand: Bosch Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands