2. Hold the thread spool with the right hand and
pass the thread with the left hand around the
thread-guide
3
.
3
Thread-guide
3
NM 2830 e - 19 -
THREADING THE SEWING MACHINE
Raise the needle and the presser foot. Place a thread
spool on the thread spool pin, the thread turning the
thread spool counterclockwise.
1. Press the needle position key
1
at least twice to
raise the needle and the thread lever
2
.
1
needle position key
2
thread lever
2
3
1
4
5
6
4
2
5
6
2.
3.
4.
5.
3. Pull the thread down through the slit and guide it
around the check spring holder
4
. Then pull the
thread up again.
4
check spring holder
4. Guide the thread around the thread lever
2
. The
thread glides automatically into the opening of the
thread lever.
2
thread lever
5. Pull the thread down and pass it through the
thread-guide
5
and behind the thread-guide at
the needle bar
6
.
5
thread-guide
6
thread-guide at the needle bar
6. Thread the needle with the needle threader as
described on the next page.
NM2830e 29/3/07 12:05 PM Page 19