16
17
• Wipe base with a soft damp cloth or sponge Do not submerge base
in water Do not spray the base with water or any other liquid Base is
not dishwasher safe Important: Do not use abrasive sponges, cloths, or
cleansers as these can damage the finish
• Clean all other parts in warm, soapy water A mild detergent is
recommended Rinse well and dry thoroughly
• To clean the filter and blade, hold them under warm running water Use a
bristled dish washing brush to gently clean pulp from filter Rinse the
filter from the outside under running water If your sink has a spray hose
attachment, this is especially effective for loosening fiber from the filter and
the blade before placing them in the dishwasher
• Dry components thoroughly then assemble the machine and turn the power
on to spin out any excess water
• Make sure unit and parts are completely dry, then store in a cool, dry place
To Clean Juice Spout:
STEP 1
Locate removable juice spout locking
mechanism on the bottom side of
receptacle Note: Juice spout will be in
the locked position
STEP 3
Lift up juice spout carefully from
receptacle and remove to clean To
Reattach: insert juice spout back into
original position and turn the locking
mechanism clockwise to lock into place
STEP 2
To unlock, turn locking mechanism
counter-clockwise, lining up notch
with juicer spout hinge pivot arm
ImPORTANT:
When reattaching juice spout back into original position make
sure juice spout is in the locked position and tightly secured before use
UNLOCKED
POSITION
Hinge
Pivot Arm
LOCKED
POSITION
Locking
mechanism
Summary of Contents for MT1020-1
Page 22: ...22 NOTES ...
Page 23: ......
