9
Adjusting the DreamWear Full Face Mask
1. Peel the headgear tabs away from the fabric. Adjust the length of the top straps. Press the
tabs back against the fabric to reattach. Repeat this step with the bottom straps (figure step 6).
Note: do not overtighten the headgear. Signs of overtightening include redness, sores, or
bulging skin around the edges of the mask.
2. Position the mask until it fits comfortably (figure step 7).
3. When finished the elbow should rest at the top of the head (figure step 8).
Using the mask
1. Connect the CPAP tubing (included with the CPAP device) to the
tubing quick release on the
elbow.
2. Turn the therapy device on. Lie down. Breathe normally.
3. Assume different sleeping positions. Move around until comfortable. If there are any
excessive air leaks, make final adjustments. Some air leaking is normal.
Summary of Contents for SleepSMART DreamWear
Page 11: ...11...
