To adjust the mask, peel the headgear
tabs away from the fabric. Adjust the
length of the straps. Press the tabs
back against the fabric to reattach.
Note: Do not overtighten the headgear.
Position the frame on the top of the
head. Pull the headgear over the back
of the head.
Position the mask until it fits comfortably.
When finished, the elbow should rest at
the top of the head.
The cushion opening will be directly under
the nostrils. The cushion will hug the nose
and leak will be minimal.
Note: At no time should the nose be inside the cushion opening. If any part
of the cushion overlaps the nose, the cushion is being worn incorrectly.
With the mask assembled, place the
cushion under the nose.
Note: Please read the Instructions for Use for further fitting information.
Nasal
Using the nasal cushion sizing gauge (included with the mask),
hold it horizontally under the nose. Select the cushion size
based on where the outer edge of the nostrils and tip of the
nose contact the gauge.
Note: Four cushion sizes (small, medium, large, medium-wide) are available.
Gel pillows
Using the gel pillows sizing gauge, place the pillows cushion tips
into the nostrils. Choose the cushion size that allows the blue gel
bases to sit comfortably under the nose without any gaps.
Note: Three cushion sizes (small, medium, large) are available.
Summary of Contents for SleepSMART DreamWear
Page 11: ...11...
