background image

•   Mains Power 

110~240V AC 50/60Hz 0.7A

 

DC Power 

12~14V DC 6A

• 

Output:

 

Ni-MH Batteries 

4~8 Cells (4.8~9.6V)

 

   

(8 cells mains only)

• 

Charge Rates  

0.5A, 1.0A, 2.0A, 3.5A & 5.0A

• 

Charge Termination 

Delta Peak Voltage Detection

• 

Included Charge Leads:  Tamiya/Molex Charge Lead

 

   

TRX Charge Lead

 

   

T Type Charge Lead

 

   

Rx Charge Lead

NX86

NiCd/NiMH DELTA PEAK AC/DC CHARGER

OPERATING INSTRUCTIONS

www.

l

ogic

rc

.com

Logic RC Ltd, 12-18 Hartham Lane, Hertford, SG14 1QN, UK

1. 

Connect a suitable battery charge lead to the charger by clamping the bare ends of the charge lead into the charger 

output, ensuring the correct polarity.

2. 

Connect either the mains or 12V input power lead into the relevant socket on the back of the charger and connect this 

power lead to the appropriate power source.

3. 

Select the correct charge rate for the battery pack being charged. 

4. 

Connect the battery to be charged to the output. When connected, the Red ‘Charging’ LED will glow to indicate fast 

charging. 

5. 

When the battery is fully charged, the peak circuitry will terminate the fast charge and the Green ‘Finished’ LED will 

glow to indicate that the battery is now fully charged.

The approximate charging time for a fully discharged pack can be calculated by:-

Time (hours) = Battery Capacity (mAh) / Charge Rate (mA) x 1.2

• 

DO NOT charge packs that cannot accept fast charging at the selected rate. 

• 

ALWAYS monitor the battery pack being charged and disconnect from the charger if the pack becomes excessively 

hot.

• 

NEVER leave the charger unattended whilst charging.

• 

DO NOT fast charge batteries immediately after use while they are still warm. Allow to cool to ambient temperature 

before charging.

• 

This charger should only be used to charge NiCd or NiMH batteries.

• 

DO NOT charge non-rechargeable or Lithium batteries using this charger.

• 

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning 

the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. 

Cleaning and user maintenance shall not be made by children without supervision. 

SAFETY PRECAUTIONS

CHARGING YOUR BATTERY

English

SPECIFICATIONS

Summary of Contents for NX86

Page 1: ... charge and the Green Finished LED will glow to indicate that the battery is now fully charged The approximate charging time for a fully discharged pack can be calculated by Time hours Battery Capacity mAh Charge Rate mA x 1 2 DO NOT charge packs that cannot accept fast charging at the selected rate ALWAYS monitor the battery pack being charged and disconnect from the charger if the pack becomes e...

Page 2: ...er erst abkühlen lassen Sicherheitsvorkehrungen Betrieb Deutsch 1 Connectez le câble de charge sur la face avant du chargeur en respectant les polarités Rouge et Noir 2 Brancher le chargeur sur le reseau électrique ou sur une source 12V en utilisant le câble adéquat 3 Sélectionner la valeur du courant de charge en fonction de l accu à charger 4 Connecter l accu à la sortie du chargeur Lorsque la c...

Page 3: ...rapida ad una batteria dopo l uso quando è ancora calda Lasciare raffreddare a temperatura ambiente prima della nuova carica Norme di Sicurezza USO Italiano 1 Sluit de batterij aan op de lader door de uiteinden van de draden te verbinden met de lader Kijk zeer goed de polariteit na is rood zwart 2 Verbind de lader met een 12V stroombron of steek hem in het stopcontact Connecteer hiervoor de correc...

Page 4: ...usohjeet Käyttö Suomi 1 Anslut laddkabeln till laddaren genom att skruva fast de skalade kabeländarna i polskruvarna Kontrollera att polar iteten är korrekt röd svart 2 Koppla in spänningskabeln i uttaget på baksidan av laddaren Koppla in kontakten i vägguttaget 3 Välj korrekt laddström för batteriet som ska laddas 4 Koppla in batteriet som ska laddas till laddkontakten När batteriet är inkopplat ...

Reviews: