Fusion NavNet TZtouch Series, Manual

Page: 5 / 13

4
3.2. Interconnection with Fusion Stereos
Fusion stereos can be networked with the MFDs as follows. The stereos should be assigned with an IP address by
manual setting as shown in Section 3.3 .
Notes:
(1) FUSION-Link supports both NMEA2000 and Ethernet protocols, but NavNet TZtouch and TZtouch2 MFDs use the
Ethernet network to interface with Fusion stereos for FUSION-Link. Note that the TZT9/14/BB and
TZTL12F/15F/2BB does NOT support an NMEA2000 connection for FUSION-Link.
(2) Wi-Fi network between Fusion APOLLO series and MFDs is NOT available.
(3) The MS700 version should be 1.1.3255 or later in order to have a static IP option. For detailed user update
procedures, follow the Fusion MS700 instructions.
3.3. Assigning a Static IP to Fusion Stereos
Assign either one of the following Class-B or -C IP addresses and subnet mask to the stereos as shown in the following
procedures.
Settings Class-B Class-C
IP Address 172.31.xxx.xxx 192.168.252.xxx
Subnet Mask (*2) 255.255.000.000 255.255.255.000
For Network with… TZT9/14/BB , TZTL12F/15F/2BB (*2),
and/or TZT9F/12F/16F/19F (*2)
TZT9/14/BB
Notes:
(1) Make sure to enter the subnet mask corresponding to the IP address.
(2) For network with the TZTL12F/15F/2BB and TZT9F/12F/16F/19F, assign a Class-B IP
(172.031.xxx.xxx / 255.255.000.000) to the stereos. The TZT9/14/BB is also compatible with both Class-B
and -C IP address ranges.