Fusion NavNet TZtouch Series, Manual

Page: 3 / 13

2
1. FUSION-Link Compatibility
NavNet TZtouch, TZtouch2, and TZtouch3 series MFDs have been always been compatible with FUSION-Link via
Ethernet, NavNet TZtouch2 (v8 and above) and TZtouch3 MFDs (v2 and above) enabled compatibility with
via NMEA2000. The following table summarizes the network compatibility.
Series Model
Interface with Fusion Stereos
Ethernet NMEA2000
NavNet TZtouch TZT9/14/BB
✔
No
NavNet TZtouch2 TZTL12F/15F and TZT2BB
✔ ✔
Compatible
( v8.01 and later)
NavNet TZtouch3 TZT9F/12F/16F/19F
✔
Compatible
( v2.01 and later)
See the following sections for network procedures, compatible Fusion stereo models, and FUSION-Link operation.
2. Networking with Fusion Stereos via NMEA2000 –
NavNet TZtouch2 and TZtouch3 Only
2.1. Compatible Fusion Stereos
Fusion stereos with NMEA2000 interface can be connected to the NavNet TZtouch2/3 network for control via NMEA2000.
When connected by NMEA 2000; they should not be connected to Ethernet. ONLY one method used not both.
For stereo models with NMEA2000, refer to the product information in the Fusion website.
< http://www.fusionentertainment.com/ >.