background image

10

11

Trigger The Anti-Car-Jacking Mode:

a)

. 50 seconds after the system has been triggered the siren will  

start chirping for 15 seconds. 

Note:

 During this 15 seconds period of chirping, the user may push  

the valet switch once to turn off the anti-car jacking feature. If not, it will  
enter second timer anti-car jacking.

b).

 65 seconds after the system has beer triggered. The siren starts  

sounding and the indicator lights start flashing.

c).

 90 seconds after the system has beer triggered 

 1.

 The siren will still sound and the parking lights will continue to flash. 

 2.

 The starter disable will activate to prevent the vehicle from starting. 

 3.

 It will remain active until the vehicle’s battery power is exhausted. 

To Turn Off Anti-Car Jacking: 

Turn the ignition switch from OFF to ON, and within 10 seconds push the 
valet switch, the siren will stop and the system will disarm.

CAR LOCATOR

While armed, press   (Lock) button on the remote to activate car locator 
function. The siren will chirp 6 times and the indicator lights will flash12 
times, for you to easily locate your car. 

BOOT/TRUNK RELEASE

Press and hold   (Unlock) button on remote for 2 seconds to open the 
boot / trunk release or other electric devices. (Only applicable if additional 
products are installed)

PROBLEM

POSSIBLE CAUSE

ACTION

No Operation

No power to alarm

Check power 
connection, main 
fuse, fuse holder and 
ground connection. 
Check battery.

In valet mode

Check LED for 
constant illumination 
and disable valet 
mode

No siren sound or 
quiet sound

Faulty siren

Replace siren

Water in siren cone

Drain water, dry and 
relocate siren

Poorly earthed unit

Rewire or relocate 
the earth wire and 
affix securely

Faulty connection to 
siren

Check connections

In valet mode

Turn valet mode off

Alarm will not 
arm / disarm

Remote battery flat

Place vehicle into 
valet mode. Override 
system and get new 
battery

Vehicle battery flat

Re charge vehicle 
battery

Remote not 
programmed

Re-program remote
(pg4 Installation 
manual)

No indicator 
response

Fuse blown

Replace Fuse and 
check

TROUBLE SHOOTING

Summary of Contents for CE-SS200









Reviews: