8
8
9
9
Push down
AM radio pre-set group (AM 1-2),
Push Left
Push joystick left: Seek down (radio), Track down (iPod)
Turn joystick encoder left: Manually tune down (radio), Track down (iPod)
Push Right
Push joystick right: Seek up (radio), track up (iPod)
Turn joystick encoder right: Manually tune up (radio), Track up (iPod)
7. DISP /TA (RDS)
Short key press: Display mode selection
ID3 Display - Screen Saver - Spectrum Analyzer
Alternative RDS Display Mode (Radio)
Long key press: TA On / Off (RDS)
SETUP MENU
In the SETUP menu, you can change various basic set up configurations.
Press the MENU button to enter the SETUP screen.
Turn the joystick encoder to scroll through the SETUP screen, confirm your selection by
pressing the joystick
General - Audio - Display - RDS
Press the MENU button to go back to the previous SETUP screen
GENERAL SETUP
Turn the joystick encoder to select the GENERAL icon in the SETUP screen, confirm your selec-
tion by pressing the joystick
General - Audio - Display - RDS
LOCAL Setup
Turn the joystick encoder to select the LOCAL icon, confirm your selection by pressing the
joystick.
Local - Security - Clock Adjustment - Mode Scan - Menu Reset
Turn the joystick encoder to select ON, confirm your selection by pressing the joystick.
SECURITY Setup
This is an Anti Theft Feature, if power is removed from product or battery is disconnected,
security code is required to re-activate.
Security ON
-
Turn the joystick encoder to select the SECURITY icon, confirm your selection by pressing
the
joystick
Local - Security - Clock Adjustment - Mode Scan - Menu Reset
-
Turn the joystick encoder to select ON, confirm your selection by pressing the joystick
-
Input “0602” for the default setting code. If the input code is not “0602”, cancel old
security
conditions.
-
Input a new security number you would like to use.
1) Number change : Turn joystick encoder
2) Push joystick to confirm value.
-
Input the number again for confirmation.
-
If it is different from the first input number, menu shall be moved to the input status of
“NEW
CODE”.
Security OFF
-
Turn the joystick encoder to select the SECURITY icon, confirm your selection by pressing
the
joystick
Local - Security - Clock Adjustment - Mode Scan - Menu Reset
-
Turn the joystick encoder to select OFF, confirm your selection by pressing the joystick
Turning Head Unit on when ‘Security On’ is activated
When the ‘Security On’ function is activated, you will be required to enter your security code
whenever you remove and apply power to unit.
1) Correct input of security code : Normal operation and POWER ON operation.
2) Incorrect input of security code : Operation is not available and code input is
continuously
required.
CAUTION! : User must memorise their own security code. If number is lost unit will need to
be returned to service centre.
CLOCK ADJUSTMENT
- Turn the joystick encoder to select the CLOCK ADJUSTMENT icon, confirm your selection
by pressing the joystick.
Local - Security - Clock Adjustment - Mode Scan - Menu Reset
- Set the time by pushing the joystick right / left to select hr/min and turn the joystick
encoder to change the time. Press the joystick to confirm the time.
CA-IP500 Manual ENGLISH v3.indd 8-9
CA-IP500 Manual ENGLISH v3.indd 8-9
25/11/08 9:06:50 AM
25/11/08 9:06:50 AM
