Creating a Group
Before you can create a group, you must connect multiple compatible stereos to the Fusion PartyBus network.
See the installation instructions provided with your stereo for information about installing and configuring the
network.
NOTE:
There are some limitations and other considerations when using stereos in groups. See
1
Select
>
GROUPS
.
TIP:
You can hold
from any screen to open the GROUPS menu.
2
Select the name of the stereo you want to be the primary stereo in the group.
3
Select the stereos you want to add to the group.
4
Select
DONE
.
From the source screen, you can select a source from any stereo in the group except a zone stereo, such as
the Apollo SRX400 stereo or any sources that are disabled for use on the Fusion PartyBus network (
).
Editing a Group
1
Select
>
GROUPS
.
2
Select the name of an existing group.
3
Select the stereos you want to add to or remove from the group.
4
Select
DONE
.
Leaving a Group
You can leave the Fusion PartyBus group to play local sources on the stereo.
1
Select
>
GROUPS
.
2
Select the name of the existing group you want to leave.
3
Select the stereos you want to remove from the group.
4
Select
DONE
.
Grouped Stereo Functions
After you create a group of stereos, additional functions and options are available to all stereos in the group.
• After you create a group, all of the stereos in the group share the same synchronized display.
• You can select a source from any stereo in the group, with a few limitations (
), and the source will play simultaneously on all stereos in the group (
).
• You can control playback (such as pausing and skipping tracks) on any stereo in the group, and it will affect
all stereos in the group.
• You can adjust the volume for any zone on any stereo in the group.
TIP:
When adjusting the volume, you can select ALL to adjust the volume of all the stereos in the group at
the same time.
22
Fusion PartyBus Networking
