3. Fold the clipper head ahead when the interlock
clipper head is pressed.
4. Take off the clipper head.
5. Clean the opened hinge by the help of the
provided brush.
Fig. 21
The blades must be oiled before,
during and after every use.
When the blades of the clipper are leaving
stripes or are running with reduced speed,
this is a signal that oil is required.
Place a few drops of oil ahead and laterally
on the clipper blades (see arrows in Fig. 22).
Wipe off the excessive oil with a smooth,
dry cloth.
Lubrication sprays do not have sufficient oil
for a good lubrication, but serve for cooling
the blades.
Immediately change damaged or crenated
blades to avoid injuries.
Fig. 22
8
6. Fit the favoured clipper head to the blade hinge and fold it on to the switched-on clipper by
light pressure. (Fig. 15, 16, 17).
3.2.4 Lubrication
To receive good clipping results and to increase the durability of the clipper and the clipper
head, it is necessary to apply a thin oil coat between top and bottom blade (Fig. 22).
CAUTION!
Insufficient lubrication of the clipper head causes heating and a reduced durability of clipper
and blades, as well as a reduction of the battery runtime.
Therefore:
● Lubricate the blades sufficiently during the clipping (at least every 15 minutes),
so that they do not drain (Fig. 22).
● Only use the lubricants prescribed by the manufacturer.
