Furuno TZTL12F, Installation Manual

Page: 42 / 67

3. HOW TO SET UP THE EQUIPMENT
3-8
[GRAPHIC INSTRUMENT SETUP] - [Propulsion Engine] or [Other Engine]
[Initial Setup] menu - [ENGINE & TANK SETUP]
Menu Item Description Options (setting range)
[Max. RPM] Set the maximum rpm of your engine to
show on the RPM display. 1 (rpm) to 20,000 (rpm)
[Red Zone Oil Pressure] Set the starting value for the red zone area
of the oil pressure meter. 0 (psi) to 59 (psi)
Max. Oil Pressure Set the maximum oil pressure of your
engine. 60 (psi) to 144 (psi)
Min. Temperature Set the minimum temperature for your
engine. 0.00°C to 99.00°C
[Red Zone Temperature] Set the starting value for the red zone area
of the engine temperature indicator. 0.01°C to 999.00°C
Menu Item Description Options (setting range)
Reset Instrument Pages Resets all instrument pages to default. [OK], [Cancel]
Reset Default Settings Resets the [Graphic Instrument Setup]
menu items to default. [OK], [Cancel]
Menu Item Description Options (setting range)
[Nickname] Change the nickname for the engine or tank.
[Used For Propulsion] Select which engine/tank is used to
calculate the distance which may be
traveled using the remaining fuel. [ON] uses
the engine/tank for calculations, [OFF]
ignores the engine/tank. [ON], [OFF]
[Reset] Resets the engine/tank details to default.
Fuel
Fuel2
Fuel3
Fuel4