manualshive.com logo in svg

Furuno TZTL12F, Installation Manual

Share
Download
Furuno TZTL12F Installation Manual Download Page 1

www.furuno.com

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Installation Manual

Multi Function Display

Model TZTL12F/TZTL15F

SAFETY INSTRUCTIONS ................................................................................................ i
SYSTEM CONFIGURATION ........................................................................................... ii
EQUIPMENT LISTS........................................................................................................ iii

1. MOUNTING..............................................................................................................1-1

1.1 Mounting Considerations ...................................................................................................1-1
1.2 Flush Mounting ..................................................................................................................1-2
1.3 Retrofit Kit for TZTL12F (option) and Front Fixing Panel Kit for TZTL15F (option) ...........1-3
1.4 Desktop Mounting (option).................................................................................................1-4
1.5 Installation of Transducers.................................................................................................1-6
1.6 Installation of Sensors (option) ........................................................................................1-16

2. WIRING....................................................................................................................2-1

2.1 Interface Connections (Rear of Unit) .................................................................................2-1
2.2 How to Secure and Waterproof Connections.....................................................................2-2
2.3 MULTI Cable......................................................................................................................2-2
2.4 Network Connector ............................................................................................................2-5
2.5 Video In, Video Out and USB Connections .......................................................................2-5
2.6 CAN bus (NMEA2000 Connector) .....................................................................................2-6
2.7 Example NavNet TZtouch2 System Configurations.........................................................2-10

3. HOW TO SET UP THE EQUIPMENT......................................................................3-1

3.1 How to Set Time Zone and Language ...............................................................................3-3
3.2 How to Set Units of Measurement .....................................................................................3-4
3.3 Initial Setup ........................................................................................................................3-5
3.4 How to Set Up the Radar ...................................................................................................3-9
3.5 How to Set Up the Sounder .............................................................................................3-11
3.6 Wireless LAN Setting .......................................................................................................3-16

APPENDIX 1 INSTALLATION OF TEMPERATURE SENSORS ............................AP-1

PACKING LISTS ......................................................................................................... A-1

OUTLINE DRAWINGS ................................................................................................ D-1

INTERCONNECTION DIAGRAM ................................................................................ S-1

Summary of Contents for TZTL12F




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands