3. SETTING UP THE EQUIPMENT
3-6
Menu Initial Setup
Menu Initial Setup (Engine)
Menu item
Description
Options (setting range)
[Boat Length]
Set the length of your boat.
5.0 to 9,999 ft
[Longitudi-
nal GPS
Position]
Enter the GPS antenna positioning bow-stern (Longitudinal)
and port-starboard (Lateral) position from the origin.
[Lateral
GPS Posi-
tion
(-Port)]
[Boat Icon]
Select the icon that best matches your
boat.
[Sport Fishing], [Cruiser],
[Sailboat], [Commercial]
[Size of Static Icon]
Set the size of static (such as own ship)
icons.
50 to 150
[Depth Display]
Select the start point for depth measure-
ment.
[Under Keel],
[Under Sea Level]
[Transducer Draft
Source]
Select the draft source to use on the dis-
play, among the following:
Automatic:
Use the offset value in the
DPT sentence. If the DPT sentence does
not have an offset value, the value entered
at Transducer Draft (page 3-11) is used.
Hardware:
Use the offset value in the
DPT sentence from an echosounder.
Manual:
Use the value entered at Trans-
ducer Draft (page 3-11).
[Automatic], [Hardware],
[Manual]
[Keel Draft]
Set the keel draft.
0.0 to 99 ft
[Average Boat Speed]
Select your boat type to use for average
speed calculation.
[Sailing], [Commercial],
[Powerboat]
[Nav Data Maximum
Depth]
Select the maximum depth for navigation
data.
[Very Shallow] (under 10 m),
[Shallow] (10 to 20 m),
[Deep] (20 to 200 m),
[Very Deep] (200 to 2000 m)
Menu Item
Description
Options (setting range)
[Number of Engine]
Select the number of engines on your
boat.
[1], [2], [3], [4]
[Max. RPM]
Set the maximum rpm of your engine to
show on the RPM display.
1000 to 20,000 rpm
[Red Zone RPM]
Set the starting value for the red zone area
of the tachometer.
0 to 20,000 rpm
[Red Zone Oil Pres-
sure]
Set the starting value for the red zone area
of the oil pressure meter.
0 to 999 kPa
[Red Zone Tempera-
ture]
Set the starting value for the red zone area
of the engine temperature indicator.
0°F to 999°F
[NickName Engine 1 to
4]
Change the nickname for engine 1 to 4.
Origin
