2. VIDEO PLOTTER
2-26
2.8.5
Displaying navigation lines
Internal navigation lines
Navigation lines made at the previous section can be displayed as follow.
1. Press the [NAV MENU], [3] key to show NAV LINE menu.
2. Press the [7] key several times to select VIDEO PLOTTER at NAVLINE
DATA (item 7) field.
3. Press the [2] key twice to select ON at NAV LINE (item 2) field.
4. Press the [ENTER] key.
5. Press the [3] key to select NAV LINE NO. (item 3).
6. Press the numeric key to enter the number for the navigation line which you
want to display.
7. Press the [6] key, and then enter the waypoint number which you go to.
8. Press the [ENTER] key.
External navigation line
The navigation line from the external navigator can be displayed.
1. Press the [NAV MENU], [3] key to show NAV LINE menu.
2. Press the [7] key several times to select NAVIGATION at NAVLINE DATA
(item 7) field.
2.9
Recording and Replaying Data
2.9.1
Formatting memory (RAM) card
Before you can use a memory (RAM) card with the RP-25, the card must be
formatted. Formatting prepares the recording surface of the card for use with the
system, and deletes all data recorded in the memory card.
Note:
You can format cards you’ve used before, however, in which case all prior
information on them is erased.
1. Insert the memory card in the right side card slot.
Display unit
Eject button
for left card drive
Eject button
for right card drive
Card Drive
Right: RAM card
Left: Chart card
Card slot
Summary of Contents for RP-25
Page 1: ...VIDEO PLOTTER RP 25...
