5.
Check the program numbers in the diagnostic display as follows:
a)
Start with the NavPilot powered on and in the
STBY
display.
b)
Press the
MENU
key.
c)
Turn the
Enter-knob
to highlight
OTHER MENU
and then press the
Enter-knob
.
d)
Turn the
Enter-knob
to highlight
SYSTEM SETUP
and then press the
Enter-knob
.
e)
Turn the
Enter-knob
to highlight the selection for
DIAGNOSTIC
. (The default selection is
OFF
).
f)
Press the
Enter-knob
.
g)
Turn the
Enter-knob
to highlight
PROCESSOR UNIT
and then press the
Enter-knob
.
h)
Confirm that the program numbers are now updated.
i)
Press the
MENU
key once to return to the highlighted
PROCESSOR UNIT
selection and then
press the
Enter-knob
.
j)
Turn the
Enter-knob
to highlight
CONTROL UNIT
and then press the
Enter-knob
.
k)
Confirm that the program numbers are now updated.
l)
Press the
MENU
key 4 times to return to the
STBY
display.
PLEASE NOTE:
You will be required to re-accomplish the initial setup of the pilot after
programming/upgrading the unit because all previous settings are overwritten.
FURUNO U.S.A., INC.
Camas, WA
(360) 834-9300
www.furunousa.com
Denton, MD
(410) 479-4420
Page
9
