1.
Connect any / all Control units to the NavPilot Processor and then press the POWER / BRILL key
on one of the Control units to power on the NavPilot system.
a) Open the folder named
_upd_p
.
Fig. 1
Page 5
FURUNO U.S.A., INC.
Camas, WA
(360) 834-9300
www.furunousa.com
Denton, MD
(410) 479-4420
NavPilot 700 / 711 / 720 Software Update Procedure
b
)
D
ouble-click on UP.BAT to begin updating the Processor software version.
After installing the driver software on the PC, the NavPilot 700 / 711
/ 711c
/ 720 can now be updated using
the steps detailed below. There are a total of
2
updates that need to be completed. There is the Application file
for the Processor and
an
Application file for the Controller.
2.
Set the NavPilot into STBY mode.
3.
Connect the USB cable between the PC and the NavPilot Processor unit.
4.
Execute the corresponding batch files as follows:
