FURUNO U.S.A., INC.
Camas, WA
(360) 834-9300
www.furunousa.com
Denton, MD
(410) 479-4420
To update the NavPilot software, you will need the following items:
Laptop or Desktop PC with available USB port
USB cable with a Male type-A connector at one end and a Male type-B connector
at the other end.
2 zipped software folders labeled as follows.
_udp_p.zip
(This contains both the Application and Boot software for the NavPilot processor unit)
_udp_c.zip
(This contains the Application software for the NavPilot control unit)
Connect the USB cable between the PC and the NavPilot Processor with all
Control unit(s) connected.
Page 1
USB cable
12 / 24 VDC Power Source
Connect the NavPilot Processor to vessels 12 / 24 VDC supply.
NavPilot 700 / 711 / 720
PC Driver Install & Software Update Procedure
