1. OPERATIONAL OVERVIEW
1-14
1.7
Data Boxes
Data boxes, providing navigation data, may be shown at the bottom of any full-
screen display. Up to six data boxes (two in case of large characters) may be
shown. The user may choose which data to display, where to locate it, and show
or hide it as desired. Further, data boxes may be set independently for each
display mode (radar, plotter, sounder). For how to select data for the data boxes,
see paragraph 5.4 Data Box Setup.
17.0 R
8.2nm
E1
V1
E2 320.1 R
359.9 R
11.7nm
V2 10.9nm
12/
3nm
SP
HU
319. 9
R
TRAIL 30m
02m30s
G1 IN
G2 OUT
ES 2
IR L
NR
RNG
123.5 nm
SPEED
27.6kt
TRIP LOG
1022.5nm
DEPTH
276ft
Data boxes
Radar display, showing data boxes
1.7.1
Showing, hiding data boxes with soft key
Radar:
ZOOM/D.BOX
→
D. BOX ON, D.BOX OFF
Plotter:
D.BOX ON, D.BOX OFF
Sounder:
MODE/D.BOX
→
D.BOX ON, D.BOX OFF
1.7.2
Rearranging data boxes
You may select the location for data boxes as follows:
1. Use the cursor pad to place the cursor in the data box you want to move and
press the [ENTER] knob.
2. Use the cursor pad to drag the data box to the location desired and press the
[ENTER] knob.
1.7.3
Temporarily erasing a data box
If a data box is obscuring a desired object you may temporarily erase the box.
Use the cursor pad to place the cursor inside the data box you wish to erase and
press the [CLEAR] key. To redisplay the box, press the D.BOX soft key twice.