1. OPERATIONAL OVERVIEW
1-10
1.5.2
Selecting a display
1. Press the [DISP] key to show the full-screen selection window. The icons of
modes not available are shaded in grey. PAGE 1-PAGE 5 are “hot page”
combination screen displays which you may configure as you like. For further
details see paragraph 5.5 Hot Page Setup.
PAGE 1
PAGE 2
PAGE 3 PAGE 4
PAGE 5
RADAR
PLOT
SNDR
NAV
OVRLY
· TURN KNOB TO SELECT MODE AND PUSH
TO SET.
· PUSH ANY SOFTKEY TO SELECT IMAGE
SOURCE.
Basic display
screens
Preset combination
screen displays
Full-screen selection window
2. Rotate the [ENTER] knob to select a basic display screen or a “hot page”
screen. If you selected a “hot page” press the [ENTER] knob to finish.
3.
If you selected a basic display screen at step 2,
push the [ENTER] knob.
The corresponding combination screen selection window appears.
RADAR
PLOT
SNDR
NAV
OVRLY
PUSH ENTER KNOB.
Combination screen selection window
4. Operate the [ENTER] knob to select a combination display and push it to set.