Furuno IF-2550, Installation Manual, Page: 9 / 31

7
2. Insert the fabricated cable to the cable packing (See following figure).
Inserting the cable
Note 1: The IF-2550 has different connectable ports and compatible standards
depending on the specifications and the mode to be set.
The following table shows the supported standards for each port, based on the IF-2550 spec-
ification
Note 2: Fabricated cables should be connected to their appropriate ports, indicated with a "
○
" in the following table.
Specification
Ports
IN1 IN2 IN3
OUT
1
～
4
OUT
5
～
8
OUT9
IF-2550-IEC1 IEC61162-1 IEC61162-1 IEC61162-1 IEC61162-1 IEC61162-1 IEC61162-1
IF-2550-IEC2 IEC61162-2 IEC61162-2 IEC61162-2 IEC61162-2 IEC61162-1 IEC61162-1
Modes
Ports
(〇
: Available /-: Not Available)
Remarks
IN1 IN2 IN3
OUT
1~4
OUT
5~8
OUT
9
ALARM
1~3
LOCAL_
ACK
REMOTE_
ACK/INV
IF-1001 - -
〇 〇 〇
- - - -
IF-2300
〇 〇 〇 〇 〇
- - -
〇
Input gives priority
to IN1.
IF-2500
〇 〇
-
〇 〇
-
〇
-
〇
Input gives priority
to IN1.
IF-2503 - -
〇 〇 〇 〇 〇 〇 〇
P sentense outputs
from OUT9.
IF-2550
〇 〇 〇 〇 〇
- - -
-
MD-550
(
Setting
：
OFF
)
〇 〇
-
〇 〇
- - - -
Converting AD-10
to NMEA 0183.
Connect IN1 to
data and IN2 to
shift.
Cable
packing