Furuno IF-2550, Installation Manual, Page: 8 / 31

6
6. CABLE FABRICATION
Use the TTYCSLA-1, TTYCSLA-4 (Japan Industrial Standard cables) or the
equivalents
.
7. WIRING
The procedure of the wiring is as follows;
1. Unfasten the four screws, then remove the cover.
NOTE: The connector sheet and hook spanner (239-332) are attached to the back of the cov-
er. Take care not to lose them.
Back of the cover
3
3
40 40
Attach the crimp-on lug to the core.*
Vinyl tape
Pass the Insulation Tube (supplied) onto the
drain wire.
Drain wire Drain wire
Armor Inner sheath
190 䠄 TB1/TB4 䠅
160 䠄 TB2/TB3 䠅
190 䠄 TB1/TB4 䠅
160 䠄 TB2/TB3 䠅
150 䠄 TB1/TB4 䠅
120 䠄 TB2/TB3 䠅
150 䠄 TB1/TB4 䠅
120 䠄 TB2/TB3 䠅
*: For IF-2550-IEC2 only.
Hook Spanner
㸦
236-332
㸧
Connector
Sheet