8. AIS/DSC OPERATIONS
8-5
8.14
DSC Device Selection
1. From the [Home] screen, tap [Settings] => [Interface] => [Select Input Device].
2. Scroll down the menu, then tap [DSC].
3. Select the NMEA format that the radiotelephone uses. Available options are
[NMEA0183] or [NMEA2000 Auto].
4. Close the menu.
8.15
DSC Message Information
Tap a DSC icon to show the DSC message information.
8.16
Show/Hide the DSC Target ID
You can show the AIS target’s identification below the AIS symbol.
1. From the [Home] screen, tap [Settings] => [AIS and DSC].
2. Tap the toggle box at [Target ID] to show [ON] or [OFF] as required.
3. Close the menu.
Vessel name/callsign and
MMSI (where available)
Time/date message was sent,
distance and bearing to sender
Sender’s location at time of
transmission
Tap to show message contents
Tap to show message contents
