![background image](http://html.mh-extra.com/html/audiocontrol/overdrive/overdrive_owners-manual_3011546001.webp)
FEATURES
High-Voltage Line Driver
The OVERDRIVE is a line driver that takes the input voltage of a
source unit and increases it (up to 13 volts peak) and then delivers it
downstream. No more feeble output voltage to send or allow noise into
the rest of your system.
Balanced Inputs & Outputs
The OVERDRIVE uses balanced differential input circuitry that
rejects any noise that radiates into the signal path between the source
unit and your OVERDRIVE. The OVERDRIVE can then send a
balanced signal downstream to another processor or amplifier that has
balanced inputs, (or not) i.e., AudioControl signal processors and
System90 powered signal processors. The balanced output will ensure
that the signal will remain noise free.
Anti-Oscillating Output Circuitry
Driving long lengths of cable can present a nasty capacitive load to the
source that has to drive them. This capacitance can cause instabilties
which can lead to oscillations, radio interference and excessive system
hiss. The OVERDRIVE’s low-impedance, high-current output circuitry
can easily handle long cable runs without their associated problems.
Four Output Voltage Indicators
Setting voltage levels for best signal-to-noise performance can be a
real pain — especially when you have to get out the old digital voltmeter
and find a way to make those probes stay put while you try to read the
dancing LCD display. With the OVERDRIVE’s voltage indicator LEDs,
you can say good-bye to that headache. Just turn the OVERDRIVE gain
control until your favorite light flickers and you’re done!
Selectable Ground Isolation
Avoiding ground loops and grounding-related noises are of paramount
importance in any installation. For this reason we have provided a
flexible scheme of isolating signal grounds and power grounds.
The Most Important Feature Of All: Reliability.
That’s right, your AudioControl OVERDRIVE comes with a full 5
year parts and labor warranty when it is installed by an authorized United
States AudioControl dealer. These seasoned pros have the training and
the equipment to take care of the job quickly and not leave your installa-
tion looking like some of those things in the back of the refrigerator.
Keep in mind that if you or your friends are “good with electronics” and
you choose to install it yourselves, your OVERDRIVE still has a 1 year
parts and labor warranty.
To activate your warranty, you need to
FILL OUT AND SEND IN
YOUR WARRANTY CARD!
Also, save your invoice or sales slip as
proof of purchase. Not only are these necessary for warranty purposes,
they are also important if the unforeseen disappearance of your OVER-
DRIVE should happen while you are socializing at
the local espresso and salmon bar. Insurance
companies have very little imagination.
P/N 9130380
®
OVERDRIVE
SPECIFICATIONS
All specifications are measured at 14.4 VDC (standard automotive voltage) As
technology advances, AudioControl reserves the right to continuously change our
specifications, like our weather.
Maximum input/output level ........................................... 9Vrms/13V peak
Frequency response ..................................................... 10Hz-100kHz;±1dB
Total harmonic distortion ................................................................ 0.005%
Signal to Noise ratio ........................................................................ >110dB
Input Impedance ........................................................................... 20Kohms
Output Impedance ........................................................................... 45ohms
Input gain .......................................................................................... 0-24dB
Power supply ....................... transformer isolated PWM DC/DC converter
Power draw ....................................................................................... 150mA
Recommended fuse rating ................................................................. 1 Amp
Size ........................................................................... 5.00” x 4.25” x 1.25”
Weight ................................................................................................... 2 lbs
Balanced Differential Inputs .................................................................. Yes
Input Ground Isolation Jumpers ............................................................. Yes
Output Ground Isolation Jumpers .......................................................... Yes
©1996, AudioControl, a division of Electronic Engineering and Manufacturing,
Inc. All rights reserved. Revised 1998
AudioControl, Making Good Stereo Sound Better, Performance Match, and
OVERDRIVE are all trademarks of Electronic Engineering and Manufacturing, Inc.
This literature was conceived, designed, and written under the protective canopy of
the lush, green, misty rain forest on a drizzly, gray overcast day at our home in the
Pacific Northwest.
tm
Concert Series
Line Driver
- 2 -
- 3 -
®
®
making good stereo sound better
®
22410 70th Avenue West • Mountlake Terrace, WA 98043
425-775-8461 • Fax 425-778-3166 • www.audiocontrol.com
Owner’s Enjoyment
Manual
Congratulations!
You have just purchased a high-performance autosound product, the
AudioControl OVERDRIVE Line Driver. The OVERDRIVE will allow
you to utilize every last bit of performance and sound quality that you’ve
always strived for from your vehicle’s sound system. So find a nice dry
spot well away from the rainforest drizzle, and take in the clean air along
with this Enjoyment Manual for the OVERDRIVE Line Driver.
Features of the Concert Series OVERDRIVE:
• High signal voltage capability: 13 volts peak output
• 24 dB of gain
• Balanced differential inputs
• Low-impedance balanced differential outputs
• Ultra-low distortion, ultra-quiet operation
• Anti-oscillating, high-current output circuitry
• High-headroom PWM switching power supply
• Selectable ground isolation
• Optimum voltage indicator LEDs