Furuno FSV25S, Operator'S Manual

Page: 138 / 163

8. MAINTENANCE, TROUBLESHOOTING
8-12
8.11.2 Operation test
The operation test checks the system for proper operation. Select [Operation Test]
from the [Test] menu to do this test.
For any NG, contact your dealer for advice.
How to read the test results
No. Description
(1) Program no. (displayed in white). Abnormal number shown in red.
(2) Voltage of the lithium battery on the Mother board, which backs up data. If
the voltage is 2.6 V or less, have a qualified technician replace the battery.
(3) DIP switch setting on each board
(4) Memory read/write test. Result is shown as “OK” (white) or “NG” (red).
(5) +B voltage
(6) Motion sensor test results. Result is shown as “OK” (white) or “NG” (red).
(7) No.2 control unit check results.
OK: Normal, NG: Error
XX: Version No.
BOARD TEST
FSV-2503
TRCPU-0
105-0840-XX.XX
105-0894-XX.XX
K O = M O R K O = M A R
RAM = OK
DATA = OK
Press MENU/ESC key to cancel.
INC
TRX
TEST = OK
PITCH = +12.3
ROLL = - 2.5
PWR 12V = 12.1V
0000000000
USB =
USB =
Monitor1 =
1280x1024
Monitor2 =
HDD = *****
PCI = *****
CPU Temperature = 32.0°C
BOARD Temperature = 20.0°C
CPU Fan Speed = 4800rpm
BATTERY = 3.2V
LAN MAC address = ********
FSV-2501
105-XXXX-XX.XX
105-XXXX-XX.XX
105-XXXX-XX.XX
ROM = OK
RAM = OK
LAN MAC address = ********
S2 00000000(40)
S3 00010000(10)
S1 1111(F)
FSV-8502
105-XXXX-XX.XX
105-XXXX-XX.XX
105-XXXX-XX.XX S1 00000000(0)
ROM = OK
RAM = OK
LAN MAC address = ********
S2 00000000(0)
EW = Enable
CAN Unique No. =
+B = 200.5V
OPERATION TEST
LAN MAC address = ********
TD
00
TEMP = 76.4°C
Position = 1450 mm (91)
UP_LSW = 0 mm (0)
HTX_SW = 1000 mm (62)
LTX_SW = 1300 mm (81)
DN_LSW = 1600 mm (100)
FSV-2501
105-XXXX-XX.XX
105-XXXX-XX.XX
105-XXXX-XX.XX
ROM = OK
RAM = OK
LAN MAC address = ********
S1 1111(F)