36
Laser Scanner
Light Source
Wavelength: 650 nm Visible semiconductor laser
Compliance
IEC60825 Class 2
Laser Emission Time
7 sec max. (Software-adjustable from 1 to 7 sec with step of 1 sec.)
Scanning Rate
100
±
20 scannings/sec
Scanning Direction
Bi-directional
Scanning Resolution
Bar width of 0.127 mm or more
Barcode Types
( ) indicates maximum-
readable digits for
variable-length barcode.
UPC-A, UPC-E, EAN/JAN-8, EAN/JAN-13
CODE39 (30 digits)
CODE39 Full ASCII
Lower-case alphabet etc. requires 2 digits. Therefore, the number of characters
will half if all digits are converted to ASCII.
Reading of CODE39 and CODE39 Full ASCII can not be enabled simultaneously,
and logically they can not be distinguished each other automatically.
CODE93
CODE128 (38 digits)
By using code set C, you may cover 2 numerals with one digit. In this case, up to
76 digits are readable if all digits are numeral.
CODABAR[NW-7]
ITF/DTF
Reading of both code types may be enabled simultaneously.
For both code types, number of digits is not variable but must be fixed to some digit
number between 0 and 50. Exactly the specified number of digits are decoded.
If number of digits is set to zero for both ITF and DTF, code type will be identified
automatically.
NOTE: The above-listed digit numbers are for reference only. They were all
obtained by factory-experiment using our standard barcodes (0.25-mm
resolution). Actual digit number subjects to decoder software, optical
condition, print quality of barcode label, environmental condition (lighting),
etc. Sometimes the above-listed digit numbers may not be read. Actual
digit numbers should be determined locally by experiment using actual
barcode labels.
Acknowledgement Beep
Succeeded:
1 beep
Failed:
2 beeps
(Cont’d)
