Furuno FE-700, Installation Manual

Page: 16 / 60

1. MOUNTING
10
6. Fix stud bolts with washers and bolts loosely.
7. Keep seachest cap and shaft assembly free of dirt and dust.
8. Grease (supplied) both sides of the gasket 2 and place it onto the gate valve.
9. Place seachest cap and shaft assembly onto the gasket 2.
10. Fix the assembly with bolts, nuts and washers loosely.
11. Unscrew nuts from flange 2, and confirm that shaft can be moved up and down
smoothly by hand.
You will feel some resistance because of the O-ring (P135). (See the illustration
on the previous page.)
12. Fasten the gate valve with bolts, nuts and washers above and below.
Note: When installing a transducer, do it before step 7 or after removing the seachest
cap and the shaft assembly.
Flange 2
Nut
Washer