Furuno FAR-2218, Operator'S Manual, Page: 106 / 294

1. OPERATIONAL OVERVIEW
1-84
6. Spin the scrollwheel, or press the appropriate menu number to change or adjust
the settings, then left-click, or press the ENTER MARK key to confirm the setting.
7. Close the menu.
Menu item Description
Page 1
[2 ECHO COLOR]
Changes the color used to display echoes. The available
colors are: [YEL] (yellow), [GRN] (green), [WHT] (white),
[AMB]* (amber), [M-GRN]* (mutli-green), [M-CYA]* (multi-
cyan).
*: Shown for B/W-types only.
If you select [M-GRN] or [M-CYA], the echo color changes
depending on the echo strength.
• [M-GRN]: red for strong echoes, ranging through to
green for weak echoes.
• [M-CYA]: red for strong echoes, ranging through to green
for weak echoes.
[3 PALETTE] Changes the color scheme (see paragraph 1.45.3).
[4 CONTROL PANEL] Adjusts control panel back-light brilliance.
[5 CHARACTERS] Adjusts on-screen text brilliance.
[6 CURSOR] Adjusts cursor brilliance.
[7 ECHOES] Adjusts the echo brilliance.
[8 TRAILS] Adjusts echo trail brilliance.
[9 HL] Adjusts heading line brilliance.
Page 2
[2 RANGE RINGS]
Adjusts range ring brilliance.
[3 BEARING CURSOR] Adjusts bearing cursor brilliance.
[4 EBL] Adjusts EBL line brilliance.
[5 VRM] Adjusts VRM line brilliance.
[6 PI LINES] Adjusts PI line brilliance.
[7 TT SYMBOLS] Adjusts target trail symbol brilliance.
[8 AIS SYMBOLS] Adjusts AIS symbol brilliance.
[9 L/L GRID] Adjusts latitude/longitude grid brilliance.
Page 3
[2 MARKS]
Adjusts latitude/longitude grid brilliance.
[3 CHART] Adjusts chart brilliance. (Appears only for A/B/W-types with
Radar Plotter functionality.)