Furuno FAR-2137S, Installation Manual

Page: 53 / 130

3. SETTING AND ADJUSTMENT
3-13
ARPA PRESET menu setting
Open the ARPA PRESET menu by pressing [6] key on the INITIALIZE menu.
[ARP PRESET]
1 BACK
2 TTM OUTPUT
OFF/REL/TRUE
3 MAX RANGE
24/32
4 ECHO LEVEL
16
5 QV DISPLAY
OFF/ON
6 ARP W/O GYRO
OFF/ON
7 [ACQ PRESET]
8 [TRACK PRESET]
9 [ARP SENSOR DATA]
0 DEFAULT
1 BACK
2 LAND SIZE
800 M
3 ANT SELECT
XN12AF/XN20AF/
XN24AF/XN4A/XN5A
SN30AF/SN36AF/
SN4A/SN5A
4 AUTO ACQ CORRE
5 SCAN
5 AUTO ACQ WEED
1 SCAN
1 BACK
2 GATE SIZE
S/ M /L/LL
3 FILTER RESPONSE
1/ 2 /3/4
4 LOST COUNT
9 SCAN
5 MAX SPEED
100 KTS
6 TRACKING MODE
1 /2/3/4
7 START TIME TGT VECT
TIME /SCAN
50 SEC
20 SCAN
[ACQ PRESET]
[TRACK PRESET]
TTM OUTPUT
Set the output format of tracked targets among OFF, REL and TRUE.
OFF: No output
REL (relative): Target bearing from own ship, degree relative.
Target course, degree relative.
TRUE: Target bearing, degree true.
Target course, degree true.
MAX RANGE
Choose the ARPA tracking range, 24 or 32 nm.
ECHO LEVEL
Set the detection level of echoes. The setting range is 1 to 31.
QV DISPLAY
OFF: Normal picture
ON: Quantized picture; always off at power on
ARPA W/O GYRO
If a gyrocompass is not connected, choose the ARPA function, ON(working) or OFF (no
working).
LAND SIZE
Set the land size in units of 100 m. The setting range is 100 to 1000 m.
ANT SELECT
Set the antenna radiator type of your radar.