manualshive.com logo in svg

Furuno ETR-30N, Operator'S Manual

Share
Download
Furuno ETR-30N Operator'S Manual Download Page 32

 

14 

2.3.2 ETR-30N and ETR-6/10N 

When installing an ETR-30N and an ETR-6/10N, the ETR-6/10N’s host name of SOUNDER 
cannot be changed. For this reason, the set the HOST NAME control of the ETR-30N to “1” 
and its host name to “SOUNDER1.” Turn the ETR-30N off and on again after setting the 
HOST NAME control to register settings. 
 
1.  Set tappings of ETR-30N as in paragraph 2.2.1. 
2.  Set the HOST NAME control of the ETR-30N to “1” and turn on the power. 
3.  As shown in paragraph 2.2.2, set sounder source for “SOUNDER1” on the NavNet 

display unit as below. 

a)  Rotate the [ENTER] knob to choose SOUNDER SOURCE. 

b)  Press the EDIT soft key. 

c)  Enter SOUNDER1 with the numeric keys. 

d)  Press the RETURN soft key. 

Note: The HOST NAME control setting and sounder source name (numeric) must agree. 

(See the table below.) If not, the equipment cannot function. 

4.  Set the ETR-30N as shown in paragraph 2.2.3. 

 

HOST NAME 
control setting 
on ETR-30N 

SOUNDER SOURCE set 
on NavNet display unit 

1 SOUNDER1 
Note: The host name and frequency on the ETR-6/10N are fixed to SOUNDER and 50/200 

kHz, respectively. 

HUB

NavNet
Display Unit 1

NavNet
Display Unit 2

NavNet
Display Unit 3

Change sounder
source to "SOUNDER1."

ETR-30N
HOST NAME: 1

ETR-6/10N

Turn power
off to set.

Set up
transducer.

 

Installation with ETR-30N and ETR-6/10N 

If the ETR-6/10N is generating interference, use the interference rejector on the NavNet 
display unit to reject it. If that does not work, contact your dealer for advice. 

Summary of Contents for ETR-30N

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands