13
Note: The same IP address cannot be used when installing two ETR-30N or ETR-6/10N. To
change IP address and host name, set a different number (1-9) for each network
sounder with the HOST NAME switch on the ETR-30N. Note however that the
ETR-6/10N’s host name and IP address are “SOUNDER” and “172.31.92.1,”
respectively, and they cannot be changed.
HOST NAME control setting and resulting host name and IP address
HOST NAME
Control Setting
Host Name
IP Address
0 (Default Setting)
SOUNDER
172.31.92.1
1 SOUNDER1
172.31.92.11
2 SOUNDER2
172.31.92.12
3 SOUNDER3
172.31.92.13
4 SOUNDER4
172.31.92.14
5 SOUNDER5
172.31.92.15
6 SOUNDER6
172.31.92.16
7 SOUNDER7
172.31.92.17
8 SOUNDER8
172.31.92.18
9 SOUNDER9
172.31.92.19
NET KP
If installing two ETR-30Ns, connect cable MJ-A7SPF0002-050 between NET KP OUT/IN
ports to prevent interference. Maximum two ETR-30N units may be installed; however,
there are two ports. One is for future use.
Summary of Contents for ETR-30N
