Furuno DRS4W, Operator'S Manual, Page: 21 / 36

3. INSTALLATION
15
3.4 How to Set up the
Radar Sensor
Before you can set up and use the radar sen-
sor, download and install the free application
[Marine Radar] from the App Store. The appli-
cation is common to both the iPad and the
iPhone.
Set up the radar as shown in this section, in
the order given.
An insert sheet requests you to attach the
supplied SSID and password label to the in-
sert sheet. Attach the label to the sheet, and
store the sheet in a safe place for future refer-
ence.
3.4.1 How to start the system
Power the sensor. Open your iOS
terminal, then turn on the wireless
LAN function (in the [Settings]
menu) if it is not already on. Tap
the [Marine Radar] application
(see right figure, appearance subject to
change) in your terminal.
The splash screen appears for a few mo-
ments, then the application tries to connect to
the radar sensor, which normally takes no
more than three seconds. If the connection is
successful, the [Preheating] display appears.
If the connection could not be made, an error
message appears. Tap the [Search again]
button to try to connect to the sensor. If the
application cannot connect to the sensor,
check to see if the wireless LAN function is
enabled on your terminal.
After the preheating is completed, which
takes approx. 90 seconds, the radar goes into
standby. Tap the STB-TX icon at the top right
corner on the display to transmit.
3.4.2 Heading, timing
adjustment
How to open the Installation Settings
menu
To adjust the heading or timing, you must first
open the [Installation Settings] menu.
1. Open the menu, Settings menu:
1) iPad : Tap the menu tab at the bottom
right corner to open the menu.
iPhone : Tap anywhere to open the
menu.
2) iPad , iPhone : Tap the Settings menu
icon ( ) to show the Settings menu.
2. Tap [Installation Settings]. You are asked
to input the pass code.
3. Use the software keyboard to enter 1234.
4. Tap [Back] twice to close the menu and
return to the radar display.
Splash
screen
Searching
radar sensor
Preheating
display
Menu tab
Settings
menu icon
How to open the Settings
menu on the iPad